RG Tombs Door Company

RGT-2000

ALUMINUM INSULATED
HEAVY DUTY SERVICE
Standard Colors: White, Brown, Aluminum, Stucco. Other colors available on request.

WIDTH

Door Member	Up to 12'2"	12'3" to 16'2"	16'3" to 20'2"	20'3" to 24'3"
Door Thickness	1 7/8	1 7/8	1 7/8	1 7/8
Top & Bottom Rails	2 1/16	2 1/16	2 1/16	2 1/16
Pair of Horizontal Rails	2 5/8	2 5/8*	2 5/8*	2 5/8
Intermediate Stile (Mull)	2 7/8	3 5/8	3 5/8	3 5/8
Bottom Section Diagonally Braced	No	No	Yes	Yes
Number of Stiles	1-2	3-4	4-6	6-7

* Built in Integral Truss O/A 3 1/8"
* Additional HD "T" Strut Over Truss O/A 6 5/16"

** Additional Strut Over Truss O/A 4 1/2"

HEIGHT

Opening Height	No of Door Sections
6'6" to 8'1"	4
8'2" to 10'1"	5
10'2" to 12'1"	6
12'2" to 14'1"	7
14'2" to 16'1"	8
16'2" to 18'1"	9
Over These Sizes Contact Head Office

DETAILED DESCRIPTION

Stiles and Rails. Stiles and rails of extruded aluminum alloy. Alcan 50-ST-6 (or Equivalent) to produce a door nominal 2" thick.

Panels. Two sheets of .020 baked enamel aluminum panels extended full width of sections foamed in place with Urethane and are secured to rails, center stiles and end stiles. All extrusions are baked enamel finish to match aluminum sheets

Visual Panel. Approximately 9"-12"-18" or 24" or 36" long. Any height available up to 21'.

Reinforcing. Built-in Aluminum integral truss.

Hardware. Steel hinges and fixtures bolted in place. Case hardened ball bearing rollers.

Lock. Side lock. Padlock extra. Cylinder lock available

Tracks. 2" or 3" available depending on size or use.

Counterbalance. Torsion springs(s) on cross header shaft. Tapered drums. Galvanized lift cables. Twin stretch springs also available.

Operation. Manual (Push-Pull)... or Chain Hoist... or Electrically Operated (Must Specify) depending on door size. NOTE: Chain hoist operation recommended on all doors over 12'6" high.

Weather-strip:

Flexible rolled vinyl is provided for effectively sealing the bottom of door against weather
Pile weather-strip provided between each section
Pile weather seal provided for sides of opening

Warranty. One year limited warranty on materials and workmanship.

Architects Specifications

Aluminum insulated sectional overhead doors shall be model RGT-2000 of a size shown on plans. To be made of 50-ST-6 (or equal) aluminum alloy extruded shapes to produce a door nominal 2" thick. Aluminum panels to extend full width to each section and secured to rails, ends, and center stiles.

All doors to be accurately counterbalanced with "stress tested" torsion springs, tapered drums and galvanized lift cables. Doors shall be equipped with inclined tracks and graduated end roller carriers ensuring a weather tight fit, track and hardware of galvanized finish, ball bearing rollers (steel or nylon). Hardware model 2-OS(3-0 HDW).

Doors shall be installed by the local distributor and shall have a limited guarantee by him against faulty workmanship or materials for a period of one year.

Door openings, jambs and necessary extensions for hardware and spring mechanism supplied by others in accordance to instructions.

ALUMINUM DOORS ARE VIRTUALLY MAINTENANCE FREE

Features.

Excellent resistance to road chemicals
Impervious to bacterial growth
Will not rot
Will not decay
Will not rust
R-Factor of Foamed Core: 13